Comparison of Siglent SDS1102X-S and Hantek DSO4202C

The side-by-side comparison of the oscilloscopes’ specifications. The comparison table below makes it easier to choose the most fitting oscilloscope.

After leaving this page, you can reach your last comparison under "Comparisons".

Body
Adding/changing an oscilloscope
	Siglent SDS1102X-S (SDS1102X-S) Remove	Hantek DSO4202C (DSO4202C) Remove	Add an oscilloscope to compare
Launch	2016	2015
System	DSO	DSO
Weight	3.26 kg	2.08 kg
Dimensions	323.1 x 157 x 135.6 mm	385 x 245 x 200 mm
Display
Display type	TFT LCD	TFT LCD
Display size	8 in.	7 in.
Display resolution	800 x 480 px	800 x 480 px

Signal
Channels	2 analog + ext	2 analog + ext
Max input voltage	CAT I 400 Vrms, CAT II 400 Vrms	CAT I 300 Vrms, CAT II 300 Vrms
Bandwidth	100 MHz	200 MHz
Sampling rate	1 GSa/s	1 GSa/s
Time base	2 ns/div to 50 s/div	2 ns/div to 40 s/div
Capture rate	60000 wfms/s	2000 wfms/s
Memory depth	14 Mpts	40 kpts
Vertical resolution	8 bit	8 bit
Vertical scale	500 μV/div to 10 V/div	2 mV/div to 10 V/div
Rise time	3.5 ns	1.8 ns
Trigger	CH1, CH2, EXT	CH1, CH2, EXT, AC
Input coupling	DC, AC, GND	DC, AC, GND
Probes	1x, 10x, 100x, 1000x	1x, 10x, 100x, 1000x
Input impedance	21 MΩ+-2%, 18 pF+-3 pF	1 MΩ+-2%, 20 pF+-3 pF
Mathematics	A+B, A-B, AxB, A/B, FFT, etc.	A+B, A-B, AxB, A/B, FFT, etc.
Connectivity
AUX output	yes	yes
USB device	USB 2.0	USB 2.0
USB host	USB 2.0	USB 2.0
LAN	yes
RS232	no
Battery
Battery type
Features
Specials	25 MHz waveform generator	25 MHz waveform generator, SD card support

A maximum of 3 oscilloscopes can be compared at the same time. To add or change an oscilloscope, type the name of the oscilloscope you’re looking for in the search field of the table’s column, then click on the oscilloscope’s name in the drop-down list of search results.

Popular comparisons